Puddle flange dimensions

Fitted puddle flanges have an outside diameter ≈larger than the pipe onto which they are installed (dependent on size ). Concrete cover should be against every surface around the puddle flange. Waterproof concrete should be used to ensure a water tight seal. The puddle flange is mounted by hand on the pipe and secured with the supplied clamping bands as described in the in-stallation instructions. For larger pipes, use a clamping tool.

FRANK puddle flanges are not designed to serve as anchor points for pipes.

Limited specializes in manufacturing high pressure, large diameter , high yiel and specialty flanges. Slip on flange dimensions are covered in ASME B16. Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16. Class 1Slip-on Flange Dimensions.

Flange dimensions are determined by the pipe size and the pressure class required for the application. Flanges are standardized according publications from organizations like ASME, MSS, API and others. T = Blank Thickness (inches) d = I. P = Design Gauge Pressure psi.

S (Basic Allowable Stress) and E (Quality Factor) values were determined from tables Aand A1-A from B31.

Gr material with the temperature range of -to 1degrees Fahrenheit. Traditionally, puddle flanges have a raised height of 50mm from the main pipe surface. My understanding is that the puddle flange will prevent the passage of liquid from one side of the wall to the other (external to the pipe). For a high strength, high integrity poly long spigot puddle flange or poly thrust flange , that can be fusion welded in-line by either electrofusion or butt-fusion, please enquire.

This item is manufactured to order, with minimum lead times so be sure to lodge your enquiry. Preparing the pipe The outer surface of the pipe to be concreted in must be cleaned with cloth, steel wool or similar material. Any visible grooves on the plastic pipes must be removed with a scraper on the puddle flanges support.

EN 54 flange drilling acc. Puddle flanges diameter to 3mm 1. In figure we see how the puddle flange is fixed and sealed onto the pipe, with Ensign this type of puddle flange is available as ED0in 100mm and 150mm diameters. Fig 4: Figure shows the build in type again, this time one piece (4set screws) for use with a 200mm pipe. There are puddle flange dimensions suppliers, mainly located in Asia.

The top supplying country or region is China, which supply 1 of puddle flange dimensions respectively. K mm Hole H mm Bolts No. The thickness of integral flanges (such as on valves) is the same as weld neck in PNto PN1up to 600NB.

Working with puddle flanges. This leading product from Flexseal is available in a range of sizes for pipes up to 340mm.